Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Notice: Label all the injector electrical connectors before the connectors are removed in order to prevent reconnecting to the wrong injector.
Failure to properly connect the injectors in the correct sequence will cause severe engine damage.
5. Connect the engine wiring harness electrical connectors to the right side fuel injectors.
6. Connect the engine wiring harness electrical connector to the fuel pressure regulator.
Notice: Refer to Fastener Notice.
7. Position the right side main engine wiring harness connector to the bracket and install the connector bolt.
Tighten the bolt to 10 N.m (89 lb in).
8. Connect the right side main engine wiring harness electrical connector.
