Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Notice: Refer to Power Steering Hose Disconnected Notice .
1. Siphon the power steering fluid from the reservoir.
2. Disconnect the power steering reservoir outlet hose from the power steering pump.
3. Disconnect the power steering reservoir outlet hose from the power steering gear remote reservoir.
4. Remove the power steering reservoir outlet hose from the vehicle.
Installation Procedure
1. Install the power steering reservoir outlet hose to the vehicle
2. Install the power steering reservoir outlet hose to the power steering pump.
3. Install the power steering reservoir outlet hose to the power steering gear remote reservoir.
4. Bleed the power steering system. Refer to Power Steering System Bleeding .
Power Brake Booster Inlet Hose Replacement
Power Brake Booster Inlet Hose Replacement
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice .
1. Install a drain pan under the vehicle.
2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Remove the power brake booster inlet hose (2) from the power steering pump (1) through the wheel well.