Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
3. Install the bolts (1) and the yoke retainers (2) to the rear axle pinion yoke (4).
Tighten the rear axle pinion yoke retainer bolts to 25 N.m (18 lb ft).
4. Install the propeller shaft hanger.
5. Install the propeller shaft hanger bolts.
Tighten the propeller shaft hanger bolts to 52 N.m (38 lb ft).
6. Install the center bearing to the bracket.
7. Install the center bearing bolts (3).
Tighten the center bearing bolts to 40 N.m (30 lb ft).
8. Remove the safety stands and lower the vehicle.