Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
License Plate Bracket: Service and Repair
Rear License Plate Pocket Replacement
Rear License Plate Pocket Replacement
Removal Procedure
1. Remove the right side rear door outside handle and license pocket.
2. Remove the rivets, retaining the rear license pocket filler, using an appropriate drill and drill bit.
3. Remove the rear license pocket filler from the license pocket.
Installation Procedure
1. Install the rear license pocket filler to the license pocket.
2. Install the rivets, to retain the rear license pocket filler, using a rivet gun.
3. Install the right side rear door outside handle and license pocket.
