Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Axle Bearing: Adjustments
Wheel Bearing Adjustment
Preliminary Inspection
Important: Ensure the brakes are fully released and do not drag.
Pull or push the tire at the top back and forth in order to test the wheel bearing play.
*
Use a pry bar under the tire as an alternative.
*
If the wheel bearing adjustment is correct, the movement will be barely noticeable.
*
If the movement is excessive, adjust the bearings.
Adjustment Procedure
Tools Required
J 2222-C Wheel Bearing Nut Wrench
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the axle shaft.
3. Remove the hub adjuster nut retaining ring.
4. Remove the adjuster nut lock key.
