Express 2500 2WD V8-6.0L VIN U (2004)
2. Install the pedal to the vehicle.
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the pedal retaining nuts.
^
Tighten the pedal retaining nuts to 25 Nm (18 ft. lbs.).
4. Install the left floor air outlet duct.
5. Install the left side kick panel.
6. Install the release handle.
7. Enable the park brake cable automatic adjuster.
8. Verify that the vehicle will hold position with the brake pedal depressed.
9. If additional adjustments need to be made, refer to Park Brake Adjustment.
