Express 2500 2WD V8-6.0L VIN U (2004)
16. Install the transmission cover bolt.
Tighten the bolt to 12 Nm (106 inch lbs.).
17. Raise the front drive axle into position.
18. If equipped with AWD, install the differential carrier upper mounting bolt and nut until snug. Do not tighten at this time.
19. If equipped with AWD, install the differential carrier lower mounting bolt and nut.
Tighten the bolts to 100 Nm (75 ft. lbs.).
20. If equipped with AWD, install the inner axle housing washers and nuts to the bracket.
Tighten the nuts to 100 Nm (75 ft. lbs.).
21. Remove the jack from the front drive axle.
