Express 2500 2WD V8-6.0L VIN U (2004)
Knee Diverter: Service and Repair
Knee Bolster Bracket Replacement - Right
KNEE BOLSTER BRACKET REPLACEMENT - RIGHT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Remove the knee bolster trim panel.
2. Remove the body control module (BCM).
3. Remove the nuts (1) securing the knee bolster bracket to the instrument panel (I/P).
4. Remove the knee bolster bracket (2).
INSTALLATION PROCEDURE
1. Align the knee bolster bracket (2) to the I/P.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts (1).
Tighten
Tighten the nuts (1) to 10 N.m (88 lb in).
3. Install the knee bolster trim panel.
4. Install the body control module.