Express 3/4 Ton Van V6-4.3L VIN W (1998)
REMOVAL PROCEDURE
TOOLS REQUIRED
J 9886-01 Door Handle Clip Remover
1. Remove the window regulator handle (2) using the J9886-01.
2. Remove the window regulator handle bezel (4).
3. Remove the screws that retain the front door trim plate to the door panel.
4. Pull the bottom of the front door trim plate out in order to remove the retainers on the front door trim plate from the front door trim panel (1).
5. Remove the front door trim plate from the slots in the front door trim panel.
6. Remove the front door trim plate from the vehicle.
INSTALLATION PROCEDURE
1. Install the front door trim plate to the front door trim panel (1).
2. Install the front door trim plate to the slots in the front door trim panel (1). Align the retainers on the front door trim plate to the slots in the front
door trim panel (1). Press the trim plate into position.
3. Install the screws that retain the front door trim plate to the front door trim panel (1).
4. Install the window regulator handle bezel (4).
5. Install the window regulator handle (2).
With Power Windows
REMOVAL PROCEDURE
1. Remove the inside door handle bezel.
2. Remove the screws (4) that retain the front door trim plate (3) to the door panel.
3. Pull the bottom of the front door trim plate (3) out in order to remove the retainers on the front door trim plate from the front door trim panel (5).
4. Remove the front door trim plate from the slots in the front door trim panel.
5. Disconnect the electrical connectors (1, 2) from the switches on the front door trim plate.
6. Remove the front door trim plate (3) from the vehicle.
