Express 3/4 Ton Van V6-4.3L VIN W (1998)
Keyless Entry Transmitter Battery: Service and Repair
Battery Replacement
REMOVAL PROCEDURE
1. Insert a small coin between the two halves of the transmitter case at the slot provided near the key ring hole.
2. Twist the coin in order to open the case.
3. Open the transmitter case.
NOTICE: Refer to ESD Notice in Cautions and Notices.
4. Remove the battery (2).
INSTALLATION PROCEDURE
1. Install the battery (2) with the positive (+) side down. Use one 3 V CR2032 battery (or the equivalent).
