Express 3/4 Ton Van V6-4.3L VIN W (1998)
1. Sub-assemble the NEW gaskets, the spark plug wire shields, and the bolts to the exhaust manifold.
2. Install the exhaust manifold.
Refer to Exhaust Manifold Installation (Right), under Engine Unit Repair.
3. Install the starter.
4. Install the catalytic converter assembly.
5. Install the spark plugs.
6. Install the spark plug wire support and the bolts.
^
Tighten the support bolts to 12 Nm (106 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
7. Install the spark plug wires.
8. Install the fender wheelhouse extension (1).
9. Install the front tire.
10. Remove the safety stands and lower the vehicle.
