chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Rear Door Trim Plate Replacement (Manual Windows)|Page 9018 > < Latch Replacement - Rear Door|Page 9013
Page 1
background image

Rear Door Panel: Service and Repair
Rear Door Trim Plate Replacement (Manual Windows)

REMOVAL PROCEDURE

TOOLS REQUIRED

J 9886-01 Door Handle Clip Remover

1. Remove the window regulator handle (2) using the J9886-01.
2. Remove the window regulator handle bezel (4).
3. Remove the screws that retain the front door trim plate to the door panel.
4. Pull the bottom of the front door trim plate out in order to remove the retainers on the front door trim plate from the front door trim panel (1).
5. Remove the front door trim plate from the slots in the front door trim panel.
6. Remove the front door trim plate from the vehicle.

INSTALLATION PROCEDURE

1. Install the front door trim plate to the front door trim panel (1).
2. Install the front door trim plate to the slots in the front door trim panel (1).

Align the retainers on the front door trim plate to the slots in the front door trim panel (1).
Press the trim plate into position.

3. Install the screws that retain the front door trim plate to the front door trim panel (1).
4. Install the window regulator handle bezel (4).
5. Install the window regulator handle (2).

Rear Door Trim Plate Replacement (Manual Windows)|Page 9018 > < Latch Replacement - Rear Door|Page 9013