Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
4. Install the front brake hose to the front brake caliper.
5. Measure the clearance between the front brake caliper and the bracket stops.
6. If necessary, remove the front brake caliper and file the ends of the bracket to obtain a 0.26 to 0.60 mm (0.010 to 0.024 inch) total clearance.
Measure the clearances individually and add them together.
7. Bleed the brake system.
IMPORTANT: Before moving the vehicle, fill the brake master cylinder at least 1/2 way and pump the brake pedal several times to make sure it
is firm. The brake pedal must be firm before moving the vehicle. Check the fluid level in the brake master cylinder after pumping the brakes.
8. Install the tire and the wheel.
