Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
INSTALLATION PROCEDURE
1. Lubricate the front brake caliper, bushings, bolts and seals with Delco Silicone Lube GM P/N 18010909 or the equivalent.
2. Install the front inboard brake pad.
^
Snap the retainer ring into the front rake caliper piston.
^
The front brake pad retainer spring is already staked to the brake pad.
^
The front brake pad must lay flat against the front brake caliper piston.
3. Install the front outboard brake pad with the wear indicator at the leading edge of the front brake pad during forward wheel rotation. The back of
the front brake pad must lay flat against the front brake caliper.
IMPORTANT: Before moving the vehicle, pump the brake pedal until it is firm. Check the fluid level in the brake master cylinder after pumping
the brakes.
4. Install the front brake caliper onto the front brake rotor.
Delco 3486
REMOVAL PROCEDURE
The use of GM brake pad material will help to maintain a balance between the front and the rear brake performance. In addition, the use of GM brake
pad material will provide the proper brake balance for the purposes of stopping distance and control over the full range of operating conditions. The