chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Brake Hose Inspection|Page 6765 > < Brake Hose Inspection|Page 6763
Page 1
background image

Brake Hose/Line: Service and Repair

Brake Hose Inspection

Inspect the brake hoses and the brake pipes at least two times a year for the following problems:
^

Check the outer cover for road damage, cracks, and chafing.

^

Check for fluid leaks.

^

Check for damage at the brake hose and pipe connections.

^

Check that all hose and pipe mounting hardware is securely in place. Repair the mounting hardware as needed.

^

Make sure all mounting hardware is in place and secure.
Replace or repair any parts as necessary.

Brake Hose Replacement - Front

REMOVAL PROCEDURE 

1. Remove the front tires and wheels from the vehicle. 

IMPORTANT:  Clean dirt, grease, and other foreign material from the hose fittings at both ends of the brake hose before servicing brake
components.

2. Disconnect the front brake pipe from the brake hose.

3. Remove the retaining nut and retaining clip from the front brake hose.

Brake Hose Inspection|Page 6765 > < Brake Hose Inspection|Page 6763