Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
CAUTION: Refer to Brake Pipe Replacement Caution in Service Precautions.
IMPORTANT: Brake pipes that run parallel to each other must maintain a 6 mm (1/4 inch) clearance.
1. Disconnect the front brake pipe from the front brake hose.
2. Disconnect the front brake pipe from the Electronic Brake Control Module (EBCM) unit.
3. Remove the retaining clips of the brake pipe from the frame.
4. Remove the from brake pipe from the vehicle.
INSTALLATION PROCEDURE
1. Install the front brake pipe to the vehicle.
