Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
Oil Pressure Sender: Service and Repair
Removal Procedure
^
Tools Required
-
J 41712 Oil Pressure Switch Socket.
1. Disconnect the electrical connector.
2. Hold the engine oil pressure sensor fitting with a wrench.
Important: Note the alignment of the oil pressure sensor fitting prior to removal.
3. Remove the engine oil pressure sensor using J 41712.
4. Remove the engine oil pressure sensor fitting, if necessary.
Installation Procedure
Notice: Fastener Notice in Service Precautions.