chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Exhaust System|Service and Repair|Page 2659 > < Exhaust Heat Shield Replacement (Frame)|Page 2655
Page 1
background image

Muffler: Service and Repair

Removal Procedure 

Important:  On some models, the muffler services with an exhaust pipe, not separately but as a complete unit.

1. Raise the vehicle and suitably support the vehicle with safety stands.
2. Loosen the front clamps from the muffler, if applicable. Remove the retaining nuts from the front muffler flange, if applicable.
3. Loosen the rear clamp from the muffler, if applicable.

4. Remove the hangers from the exhaust system, as required.

5. Remove the muffler from the vehicle.

Installation Procedure 

1. Install the muffler to the vehicle.

Exhaust System|Service and Repair|Page 2659 > < Exhaust Heat Shield Replacement (Frame)|Page 2655