Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
Turn Signal Flasher: Service and Repair
Hazard and Turn Signal Flasher Replacement
REMOVAL PROCEDURE
1. Remove the instrument panel driver knee bolster panel.
2. Remove the bolts (3) that retain the relay center and the bracket to the inner and outer brackets of the instrument panel driver knee bolster.
3. Remove the relay center (5) and the bracket (4) from the inner and outer brackets of the instrument panel driver knee bolster.
4. Disconnect the relay (1) from the relay center.
INSTALLATION PROCEDURE
1. Connect the relay (1) to the relay center.
