chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fluid - A/T|Capacity Specifications|Page 1615 > < Fluid - A/T|Capacity Specifications|Page 1613
Page 2
background image

Installation Procedure 

1. Install the new filter neck seal into the transmission case.
2. Install the filter into the case.

3. Install the oil pan and a new gasket.

Notice:  Refer to Fastener Notice in Service Precautions.

4. Install the oil pan bolts. Tighten Oil pan to transmission case bolts to 11 Nm (97 inch lbs.).
5. Apply a small amount of sealant GM P/N 12346004 to the threads of the oil pan drain plug.
6. Install the oil pan drain plug.

Fluid - A/T|Capacity Specifications|Page 1615 > < Fluid - A/T|Capacity Specifications|Page 1613