Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
Accident With Air Bag Deployment
After a collision involving air bag deployment, replace the following components. If you detect any damage to the mounting points or mounting
hardware, repair or replace the mounting points and mounting hardware as needed.
^
Inflatable Restraint Instrument Panel (IP) (inflator) module.
^
Inflatable Restraint steering wheel (inflator) module.
^
Inflatable Restraint Sensing and Diagnostic Module (SDM).
After a collision involving air bag deployment, inspect the Inflatable Restraint Steering Wheel Module Coil and the coil wiring pigtail for melting,
scorching, or other damage due to excessive heat. Perform this component inspection in addition to the inspections indicated above in Accident With or
Without Air Bag Deployment. If you detect any damage, replace the component. If you detect any damage to the mounting points or mounting hardware,
repair the component or replace the hardware as needed.
Accident With/Without Air Bag Deployment
After any collision, inspect the following components as indicated. If you detect any damage, replace the component. If you detect any damage to the
mounting points or mounting hardware, repair the component or replace the hardware as needed.
^
Steering column - Perform the steering column accident damage checking procedures.
^
IP Knee Bolsters - Inspect the knee bolsters for bending, twisting, buckling, or any other type of damage.
^
IP brackets, braces, etc. - Inspect for bending, twisting, buckling, or any other type of damage.
^
Seat Belts - Perform the seat belt operational and functional checks.
