Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
4. Remove the pitman arm nut and washer.
Mark the pitman arm and the pitman shaft in order to properly align at reassembly.
NOTICE: Do not hammer on the pitman arm, pitman arm shaft or puller. Damage to the pitman arm or steering gear may result.
5. Remove the pitman arm using the J 6632-01 or the J 29107-A.
6. Clean the threads on the ball stud and the ball stud nut.
7. Inspect the ball stud threads for damage.
8. Inspect the ball stud seals for excessive wear.
INSTALLATION PROCEDURE
-
Tools Required
-
J 29193 Steering Linkage Installer (12 mm)
