Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
Power Steering Fluid Reservoir: Service and Repair
P/S Reservoir Replacement - Off Vehicle
DISASSEMBLY PROCEDURE
1. Drain the power steering fluid from the power steering pump.
2. Remove the pump mounting studs (2).
3. Remove the connector and fitting assembly (4).
4. Remove the O-ring seal (3) from the connector and fitting assembly (4).
5. If replacement is required, remove the control valve assembly and the flow control spring from the pump housing assembly; refer to Power
Steering Pump Flow Control Valve Replacement Off Vehicle.
6. Remove the reservoir assembly (1) from the pump housing assembly (2).
7. Remove the O-ring seals (1), (4) and (5).
8. Remove the magnet (3).