Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
11. Use a screwdriver to pry the backup washer (3) and the double lip seal (2) from the steering gear housing (1).
12. Inspect the steering gear housing (1) for burrs.
13. Remove the steering gear housing (1) if necessary.
14. Insert J 6278 through the hole in the top of the steering gear housing (1).
15. Drive out the needle bearing (2).
ASSEMBLY PROCEDURE
-
Tools Required
-
J 6278 Pitman Shaft Bearing Remover and Installer
-
J 4245 Internal Snap Ring Pliers
1. Coat the double lip seal (2) and the washer (3) with grease.
