Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
3. Install the upper ball joint to the steering knuckle.
4. Install the ball joint to steering knuckle nut.
-
Tighten the nut to 100 Nm (74 ft. lbs.).
5. Install a new cotter pin. Align the slots in the nut (1) with the hole in the stud (2).
6. Bend the cotter pin as shown to prevent the pin from working loose.
7. Install the grease fitting. Grease the ball joint.
