Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
8. Install the torque converter clutch solenoid bolts.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
9. Install the bolts securing the pressure switch to the control valve body.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
10. Connect the electrical connectors to the control valve body components.
The electrical connectors locations are referenced by callouts (1) through (6).
11. Install the filter, gasket, and oil pan. Refer to Automatic Transmission Fluid/Filter Changing.
