Express 3/4 Ton Van V8-305 5.0L VIN M SFI (1999)
11. Push the flange of the axle shaft toward the differential. Refer to Shaft Damage.
12. Remove the lock from the button end of the axle shaft.
Important: Carefully slide the axle shaft (7) out in order not to damage the seal (9).
13. Remove the axle shaft (7) from the housing (2).
14. Use the J23689 to remove the seal (9).
15. Use the J23689 for 8 1/2 and 8 5/8 inch ring gear axles or the J29712 for 9 1/2 inch ring gear axles to pull the bearing (1) from the housing (2).
16. Insert the tool into the axle bore so that it grasps behind the bearing.
17. Tighten the nut and washer against the face of the bearing.
18. Pull the bearing out using the J2619-01.
19. Inspect all parts. Replace as necessary.
Installation Procedure
