chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

OnStar(R) - Analog/Digital Ready System Digital Upgrade|Page 8905 > < OnStar(R) - Analog/Digital Ready System Digital Upgrade|Page 8903
Page 4
background image

2.

Skip to the next step if the vehicle to be upgraded is not shown above.

3.

Skip to the next step if the vehicle to be upgraded is not a 2005 Cadillac STS. The 2005 Cadillac STS kit may include a new inside rearview
(ISRV) mirror assembly and a new ISRV mirror wiring cover. If the kit you receive includes these parts, please remove the existing ISRV mirror
and wire cover from the vehicle and install the ones provided in the kit per the instructions in SI.

4.

Skip this step if the vehicle to be upgraded is not listed below.

^

2003-2004 Saturn L-Series

^

2003 Saturn ION

^

2002-2003 Saturn VUE

1.

Locate and remove the Right Audio output signal terminal 7 from Connector C2 at the Vehicle Communication Interface Module (VCIM).

2.

Remove the terminal end and strip the wire.

3.

Locate the Left Audio output signal wire from terminal 1 in Connector C2.

4.

Splice the Right Audio output signal wire from terminal 7 with the Left Audio output signal wire from terminal 1.

5.

See Wiring Repairs in SI for approved splicing methods.

OnStar(R) - Analog/Digital Ready System Digital Upgrade|Page 8905 > < OnStar(R) - Analog/Digital Ready System Digital Upgrade|Page 8903