chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Lock Replacement - Side Front Door|Page 10152 > < Hinge Replacement - Door (w/ PRP)|Page 10147
Page 1
background image

Rear Door Latch: Service and Repair
Lock Replacement - Side Front Door

Lock Replacement - Side Front Door

Removal Procedure

1. Remove the side front door trim panel. Refer to Trim Panel Replacement - Side Front Door  (See: Front Door/Front Door Panel/Service and

Repair) .

2. Remove the lock rods from the side front door lock (1).
3. Disconnect the electrical connector from the side front door lock (1), if needed.

4. Remove the screw (2) that retain the side front door lock (1) to the door.
5. Remove the side front door lock (1) from the door.

Installation Procedure

1. Install the side front door lock (1) to the door.

Notice:  Refer to Fastener Notice  in Cautions and Notices.

2. Install the screws (2) that retain the side front door lock (1) to the door.

Tighten the screws to 10 N.m (89 lb in).

3. Connect the electrical connector to the side front door lock (1).
4. Connect the lock rods to the side front door lock (1).
5. Install the side front door trim panel. Refer to Trim Panel Replacement - Side Front Door  (See: Front Door/Front Door Panel/Service and Repair)

.

Lock Replacement - Side Front Door|Page 10152 > < Hinge Replacement - Door (w/ PRP)|Page 10147