chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Lock Replacement - Side Front Door|Page 10159 > < Lock Replacement - Side Front Door|Page 10157
Page 4
background image

3. Remove the nuts (2) that retain the left side rear door latch handle (4) to the left side rear door.
4. Remove the left side rear door latch handle (4) from the left side rear door.

Installation Procedure

1. Install the left side rear door latch handle (4) to the left side rear door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the nuts (2) in order to retain the left side rear door latch handle (4) to the left side rear door.

Tighten the nuts to 11 N.m (97 lb in).

3. Install the lock rods to the left side rear door latch handle (4).
4. Install the left side rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door - 60/40 Left (E26, 40 Door) (See: Rear Door

Panel/Service and Repair/Panel Replacement/Trim Panel Replacement - Side Rear Door - 60/40 Left (E26, 40 Door))Trim Panel Replacement -
Side Rear Door - 60/40 Left (E26, 60 Door) (See: Rear Door Panel/Service and Repair/Panel Replacement/Trim Panel Replacement - Side Rear
Door - 60/40 Left (E26, 60 Door)).

Latch Replacement - Rear Door (w/ PRP)

Latch Replacement - Rear Door (w/ PRP)

Removal Procedure

1. Open the door.
2. Disconnect the power connector.

3. Remove the latch bolts (2).
4. Remove the latch (1).

5. Drill out the rivets (2).
6. Remove the latch bracket (1).

Installation Procedure

Lock Replacement - Side Front Door|Page 10159 > < Lock Replacement - Side Front Door|Page 10157