chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Panel Replacement|Page 10177 > < Panel Replacement|Page 10175
Page 5
background image

Trim Panel Replacement - Side Rear Door - 60/40 Right (E24, 40 Door)

Trim Panel Replacement - Side Rear Door - 60/40 Right (E24, 40 Door)

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

1. Use the J 38778  to disengage the retainers around the outside edges of the lower portion of the door trim panel (1).
2. Carefully pull the door trim panel (1) out of the retainers around the window opening.

A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

3. Remove the front door panel (1) from the vehicle.

Installation Procedure

1. Install the door trim panel (1) to the door by performing the following:

Align the door trim panel (1) to the retainers in the window opening.

2. Push towards the door to engage the retainers.
3. Align the retainers on the edges of the lower portion of the door trim (1).
4. Push towards the door to engage the retainers.

Trim Panel Replacement - Side Rear Door - 60/40 Right (E24, 60 Door)

Trim Panel Replacement - Side Rear Door - 60/40 Right (E24, 60 Door)

Panel Replacement|Page 10177 > < Panel Replacement|Page 10175