chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Panel Replacement|Page 10180 > < Panel Replacement|Page 10178
Page 1
background image

Rear Door Panel: Service and Repair
Bezel

Handle Bezel Replacement - Inside - Rear

Removal Procedure

1. Remove the screw (2) from the inside door handle bezel.
2. Press the retaining tab on the inside door handle bezel (1) in order to release the inside door handle bezel (1) from the front door trim plate.
3. Remove the inside door handle bezel (1) from the vehicle.

Installation Procedure

1. Align the inside door handle bezel (1) to the front door trim plate.
2. Press the door handle bezel towards the door trim panel in order to engage the retaining tab.

Notice:  Refer to Fastener Notice  in Cautions and Notices.

3. Install the bezel screw (2).

Tighten the bezel screw to 1.9 N.m (17 lb in)

Panel Replacement|Page 10180 > < Panel Replacement|Page 10178