chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Cowl Moulding / Trim > < Emblem Replacement - Grille|Page 10425
Page 2
background image

*

3M(R) 06382 has a gray backing

Important: Care should be exercised not to touch the tape with your hands or allow the adhesive tape to come in contact with any dirt or
foreign matter.

5. Peel the backing from the adhesive tape.
6. Align the emblem/nameplate with the previous length of masking tape or magnetic strip.
7. Firmly press the emblem/nameplate into place for 30 seconds in order to ensure proper adhesion of the emblem/nameplate.
8. Remove the masking tape or magnetic strip from the bodyside.

Cowl Moulding / Trim > < Emblem Replacement - Grille|Page 10425