Express 3/4 Ton Van V8-4.8L VIN V (2003)
8.4.
Disassemble and assemble properly as needed.
9. Remove the key.
10. Secure the cylinder in the J 41340.
10.1. Inspect that the spring retainer is facing up and positioned directly under the punch slots.
10.2. Push the cylinder into the J 41340 until butted with the cylinder bezel.
10.3. Tighten the holding screw.
11. Stake the bezel end of the retainer in place:
11.1. Hold the flat side of the punch, part of J 41340 , squarely against the face of the cylinder bezel.
11.2. Stake the lock cylinder metal over the retainer corners.
