chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Weatherstrip > < Cowl Moulding / Trim|Service and Repair
Page 2
background image

2. Align the retainers in the body with the tabs on the grille panel . Press the retainers into place.
3. Connect the washer hoses to the air inlet grille panel.
4. Install the wiper arms to the vehicle. Refer to Wiper Arm Replacement in Wiper/Washer Systems.

Notice:  Refer toFastener Notice in Cautions and Notices.

5. Install the screws in sequential order 1-7, to retain the air inlet grille panels to the cowl vent.

Tighten the screws in sequential order to 1.7 N.m (15 lb in).

6. Close the hood.

Weatherstrip > < Cowl Moulding / Trim|Service and Repair