chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park Brake Cable Equalizer - Replacement|Page 5519 > < Park Brake Cable Equalizer - Replacement|Page 5517
Page 6
background image

1. Release the park brake.
2. Disable the park brake cable automatically adjust. 
3. Raise and support the vehicle Refer to Vehicle Lifting.
4. Disconnect the cable from the equalizer.
5. For cargo and passenger vehicle, remove the cable from the rear crossmember by depressing the locking tabs.
6. For cutaway vehicles, remove the cable from the mounting bracket by depressing the locking tabs.
7. Pass the cable through the cattle guide

8. Disconnect the rear axle vent hose clip from the cable (1500 Series).

9. Gently open the rear axle clip.

Park Brake Cable Equalizer - Replacement|Page 5519 > < Park Brake Cable Equalizer - Replacement|Page 5517