Express 3/4 Ton Van V8-4.8L VIN V (2003)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Balancer Bolt - Installation Pass - to Ensure the Balancer is Completely Installed ............................................................ 330 Nm (240 ft. lbs.)
Crankshaft Balancer Bolt - First Pass - Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes .............. 50
Nm (32 ft. lbs.)
Crankshaft Balancer Bolt - Final Pass ................................................................................................................................................................. 140 degrees