Express 3/4 Ton Van V8-4.8L VIN V (2003)
3. Install new sealing washers.
4. Install the condenser.
5. Install the condenser retaining bolts (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 9 N.m (80 lb in).
6. Install the outside air temperature bracket.
7. Install the outside air temperature bracket bolt (1).
8. Connect the outside air temperature sensor electrical connector to the sensor (1).
9. Install the evaporator hose to the condenser.
10. Install the evaporator hose retaining nut (1).
