chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 11288 > < Disabling and Enabling|Page 11286
Page 2
background image

column near the knee bolster.

6. Disconnect the steering wheel module yellow 4-way connector (2).

Zone 5

1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Service Precautions before disabling the SIR system.

2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Remove the SIR fuse from the fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the right knee bolster bracket.
6. Remove the connector position assurance (CPA) from the I/P module yellow 4-way connector (1) located behind the I/P support.
7. Disconnect the I/P module yellow 4-way connector (1).

Zone 7

1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Service Precautions before disabling the SIR system.

2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Remove the SIR fuse from the fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the connector position assurance (CPA) (1) from the steering wheel module yellow 4-way connector (2) located left of the steering

column near the knee bolster.

6. Disconnect the steering wheel module yellow 4-way connector (2).

Disabling and Enabling|Page 11288 > < Disabling and Enabling|Page 11286