Express 3/4 Ton Van V8-4.8L VIN V (2003)
Marker Lamp: Service and Repair
Marker Lamp Replacement - Front Side (With RPO Code X88/Z88)
MARKER LAMP REPLACEMENT - FRONT SIDE (WITH RPO CODE X88/Z88)
REMOVAL PROCEDURE
1. Remove the screw (4) that retains the side marker or the reflector to the grille.
2. Remove the side marker lamp (3) or the reflector (5) from the grille.
3. Disconnect the bulb socket (2) from the side marker lamp.
4. Remove the bulb (2) from the socket by turning the bulb in a counter clockwise direction.
INSTALLATION PROCEDURE
1. Install the bulb (2) into the socket by turning the bulb in a clockwise direction.
2. Connect the bulb socket (2) into the side marker lamp.
3. Install the side marker lamp (3) or the reflector (5) to the radiator grille (1).
4. Install the side marker lamp or reflector retaining screw (4) to the grille.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.5 N.m (13 lb in).
