Express 3/4 Ton Van V8-4.8L VIN V (2003)
Horn Switch: Service and Repair
Horn Switch Replacement
Removal Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the inflator module.
3. Remove the horn plunger from the steering column by pressing inward to the stop and rotating horn plunger 90 degrees.
4. Remove the horn contact plate retaining screws from the steering wheel.
5. Remove the horn plunger from the steering wheel.
Installation Procedure
1. Install the horn plunger to the steering wheel.
Notice: Refer to Fastener Notice in Service Precautions.
