Express 3/4 Ton Van V8-4.8L VIN V (2003)
2. Secure the spring latch to the PCM.
3. Connect the PCM connectors to the PCM.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the PCM connector end fasteners to 8 N.m (71 lb in).
4. Connect the negative battery cable.
5. Install the air cleaner assembly.
6. If a new PCM is being installed, program the PCM. Refer to Service Programming System (SPS) (Remote Procedure)Service Programming
System (SPS) (Pass-Thru Procedure)Service Programming System (SPS) (Off Board Remote Procedure)Service Programming System (SPS) (Off
Board Pass-Thru Procedure) in Programming. See: Testing and Inspection/Programming and Relearning
