chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Diagrams|Page 8016
Page 5
background image

Tighten
Tighten the screws to 1.5 N.m (13 lb in).

10. On vehicles with a tilt column, align the tilt lever into the steering column.
11. Slide the tilt lever handle into the steering column until the handle locks into position.

12. Feed the wiring through the steering wheel.
13. Align the steering wheel with the mark on the steering shaft. Install the steering wheel onto the shaft.
14. Install the nut for the steering wheel.

Tighten
Tighten the nut to 41 N.m (30 lb ft).

15. Install the inflatable restraint steering wheel module.
16. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3.

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Diagrams|Page 8016