Express 3/4 Ton Van V8-4.8L VIN V (2003)
9. Mount the pretensioner module (1) in the SIR deployment fixture (3) with the open end facing up using the following mounting method.
-
Adjust and secure the J 39401-B arms (4) to the deployment fixture (3).
-
To mount, use the proper size bolt (2) and nut (5) with washers in order to secure the pretensioner (1) to the deployment fixture brackets (4).
-
Securely tighten all fasteners prior to deployment.
10. Inspect the J 38826 and the appropriate pigtail adapter for damage. Replace as needed.
11. Short the 2 SIR deployment harness (1) leads together using one banana plug seated into the other.
12. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
13. Extend the SIR deployment harness and adapter to full length from the deployment fixture.