Express 3/4 Ton Van V8-4.8L VIN V (2003)
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the generator output (BAT) nut to 18 N.m (13 lb ft).
3. Raise the vehicle. Refer to Vehicle Lifting.
4. Install the positive lead to the starter solenoid.
Tighten
Tighten the positive lead to starter solenoid to 10 N.m (89 lb in).
5. Lower the vehicle.
6. If equipped with the 4.8L, 5.3L or 6.0L engine, install the positive lead to the junction block.
Tighten
Tighten the junction block nut to 10 N.m (89 lb in).
7. Connect the battery positive cable to the battery.
Tighten
Tighten the battery terminals to 17 N.m (13 lb ft).
8. Connect the battery negative cable to the battery.
