chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Steering Gear Outlet Hose Replacement|Page 7119 > < Power Steering Gear Outlet Hose Replacement
Page 1
background image

Power Steering Line/Hose: Service and Repair
Power Steering Reservoir Inlet Pipe/Hose Replacement

Power Steering Reservoir Inlet Pipe/Hose Replacement 

Removal Procedure 

Notice:  Refer to Power Steering Hose Disconnected Notice in Service Precautions.

1. Install a drain pan under the vehicle.
2. Siphon the fluid from the reservoir to prevent excessive spillage.

3. Remove the reservoir inlet hose (3) from the power brake booster (2).
4. Remove the reservoir inlet hose (3) from the reservoir.
5. Remove the reservoir inlet hose from the vehicle.

Installation Procedure 

Notice:  Refer to Fastener Notice in Service Precautions.

1. Route the hose in the same position the hose occupied prior to removal.

2. Install the reservoir inlet hose (3) to the reservoir.
3. Install the reservoir inlet hose (3) to the power brake booster (2).
4. Bleed the power steering system. 
5. Remove the drain pan from under the vehicle.

Power Steering Gear Outlet Hose Replacement|Page 7119 > < Power Steering Gear Outlet Hose Replacement