Express 3/4 Ton Van V8-4.8L VIN V (2003)
Steering Shaft: Service and Repair
Intermediate Steering Shaft Bearing Replacement
Intermediate Steering Shaft Bearing Replacement
Tools Required
-
J42640 Steering Column Anti-Rotation Pin
Removal Procedure
Notice: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or
intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become centered, which may cause damage to the coil
assembly.
1. Install the J42640 in the steering column lower access hole.
2. Remove the lower intermediate shaft.
3. Remove the power steering reservoir (3) mounting nuts (4). Position power steering reservoir out of the way.
