Express 3/4 Ton Van V8-4.8L VIN V (2003)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement (RWD)
-
Tools Required_
-
J 24319-B Steering Linkage and Tie Rod Puller
-
J 43631 Ball Joint Remover
-
J 45851 Ball Joint Separator Protector Adapters
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the outer tie rod to steering knuckle retaining nut.
5. Disconnect the outer tie rod from the steering knuckle using J 24319-B.
