Express 3/4 Ton Van V8-4.8L VIN V (2003)
13. Install the 1-2 accumulator inner and outer springs to the 1-2 accumulator cover.
14. Install the 1-2 accumulator piston onto the pin in the 1-2 accumulator cover. Ensure that the piston legs face the accumulator cover.
15. Install the 1-2 accumulator cover and the accumulator cover retaining bolts.
^
Tighten the accumulator cover retaining bolts to 11 Nm (97 inch lbs.).
16. Remove the J 25025-B from the transmission case.
17. Install the control valve body.
18. Install the transmission oil pan and filter.
19. Lower the vehicle.
20. Fill the transmission to the proper level with DEXRON III transmission fluid.
