Express 3/4 Ton Van V8-4.8L VIN V (2003)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Put the shift lever clevis into the neutral position.
3. Remove the knee bolster.
4. Disconnect the electrical connector.
5. Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam
assembly.
6. Remove the A/T shift lock control actuator.
Installation Procedure
1. Firmly install the A/T shift lock control actuator onto the steering column jacket assembly and the cable shift cam assembly.
2. Connect the electrical connector.
3. Adjust the A/T shift lock control actuator with the shift lever clevis in the neutral position:
3.1.
Pull out the tab (1) on the adjuster block side (2) of the A/T shift lock control actuator.
